Serving the Amarillo area  ·  (806) 639-5022  ·  Open Mon-Sat 7am-6pm
📞 (806) 639-5022 Free Quote

Spray Foam Insulation in Palisades, TX (79118) · Local Professionals

Amarillo Spray Foam Insulation · Fast response in Palisades and the Amarillo area · Free estimate 24h

✅ Written Estimates with R-Value & Thickness Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm
+39Verified Reviews
11Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Fully Insured✅ Written Estimates with R-Value & Thickness Specs

Palisades sits 9.8 miles south of Amarillo along the canyon rim in Randall County, where wind exposure and slab-on-grade construction make air sealing and attic insulation equally critical to comfort and energy bills.

Most homes in Palisades (79118) are built on concrete slabs with flat or low-pitch attics, and the relentless Panhandle wind drives cold air through gaps in winter and heat straight up through thin or settled insulation in summer. Our team at Amarillo Spray Foam Insulation has been serving Palisades and the surrounding area since 2015, and we know exactly where the drafts come from and how to seal them.

Spray Foam Insulation in Palisades (79118)

Palisades homes face a specific challenge: slab-on-grade construction with rim joists and band joists that sit exposed to the canyon wind, and attics that lose their insulation value year after year as the original material settles and compacts. Winter cold snaps bring drafts that no thermostat adjustment fixes, and summer heat gain through the attic turns upstairs rooms into ovens. The problem is not just R-value, it is infiltration. Air sealing the rim and band joists, the attic perimeter, and the transitions between conditioned and unconditioned space stops the wind from pulling heat out on blizzard nights and stops the sun from pouring it back in during July.

Spray foam insulation solves both problems at once. Closed cell foam seals tight and delivers high R-value in minimal thickness, which matters in Palisades where attic space is often tight and every inch counts. Open cell foam is less dense and costs less, and it works well in sealed attics where moisture is not a concern. We also handle wall injection foam for homes with uninsulated cavities, crawl space foam for pier-and-beam construction, and complete removal and replacement when old insulation has settled or is contaminated. Our crews are fully insured, and every estimate includes R-value and thickness specifications so you know exactly what you are paying for.

Our services in Palisades

How a Job Works in Palisades

We start with a free on-site assessment. Our team walks your attic, crawl space, or rim joists, measures what you have, and explains what needs to happen. We listen to where you feel drafts or hot spots, and we look at the structure itself. Slab-on-grade homes in Palisades often have rim joists that are fully exposed or buried under minimal soil, and we identify every air leak point before we write an estimate.

On job day, we set up mechanical ventilation and establish a clear re-entry window, typically twenty-four to forty-eight hours. If old insulation has to come out first, we remove it and haul it away. We spray the foam at the correct thickness and ratio, let it cure under controlled ventilation, and then we clean up. Your property is left clean and ready to use. If your home is occupied during the work, we coordinate the schedule and make sure you understand the ventilation and re-entry timeline.

We walk through the finished work with you, answer questions, and make sure you understand what was sprayed, where, and why. You get a written record of the R-value and thickness so you have it for your records or for any future buyer.

Attic spray foam in Palisades typically runs from $1.50 per square foot for open cell to $1.20 per board foot for closed cell, depending on the area to cover and the R-value you need. A typical Palisades attic might run $2,500 to $6,000 for complete coverage. Rim and band joist sealing starts at $650 for a straightforward job. Wall injection foam runs from $2 per square foot. If old insulation has to come out first, add $950 to $1,500 for removal. The actual price depends on the square footage, the R-value target, whether you choose open or closed cell, and what has to be removed or prepped first. Call us at (806) 639-5022 for a free written estimate with R-value and thickness specs so you know the cost before any work starts.

✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Palisades and nearby areas.

Why does wind matter so much for insulation in Palisades?
Palisades sits on the canyon rim where the Panhandle wind is relentless. Even excellent insulation loses its R-value if cold air is being driven through gaps in the rim joists, the attic perimeter, or around ductwork. On a 30-mile-per-hour winter day, wind-driven infiltration can pull more heat out of a slab-on-grade home than a poorly insulated attic alone. Air sealing with spray foam stops the wind at the source, and that is why we treat rim joists and band joists as seriously as attic R-value in Palisades.
My Palisades crawl space or rim area has moisture or standing water. Can you spray foam over it?
No. If there is moisture, condensation, or any sign of water intrusion, we fix the moisture problem first or we do not spray. Spray foam will trap moisture and create a hidden problem that shows up months later as smell, mold, or foam failure. We walk away from any job where the substrate is wet or contaminated. That is not a limitation, it is the right way to do the work. If you have standing water or chronic dampness in a Palisades crawl space, call us at (806) 639-5022 and we will tell you what has to happen first.
What does attic spray foam actually cost in Palisades?
Open cell foam starts at $0.55 per board foot, closed cell at $1.20 per board foot. For a typical Palisades attic of 1,200 to 1,500 square feet, closed cell to R-30 or R-38 typically runs $3,000 to $5,500. Open cell to the same R-value runs less. The big cost factors are the area to cover, the R-value you need, whether old insulation comes out first (add $950 to $1,500), and how tight the attic access is. Get a free estimate at (806) 639-5022 and we will give you a firm price with R-value and thickness written down.
Who approves the R-value and thickness for spray foam in Palisades?
The building code and the local building department do. Palisades is in Randall County, and the county or your municipality sets the energy code and the insulation requirements for your address. We design the job to meet code, and the building official inspects it if a permit is required. The ignition barrier and thermal barrier rules are set by code too, and that is the building department's call, not ours. If you are pulling a permit, ask your local building department what registration or contractor requirements apply at your address before you call us.
Can I live in my Palisades home while you spray foam the attic?
Yes, but with a re-entry window. We set up mechanical ventilation during the spray and cure process to pull fumes out of the house. The typical re-entry time is twenty-four to forty-eight hours, during which you and your family should be out of the home or in a sealed-off area away from the work. We explain the timeline clearly before we start, and we make sure you understand when you can move back into the attic space or the room above the work. If you live in a master-planned community in Palisades, check your HOA rules about exterior work, though most HOA rules do not cover interior insulation.
Are you fully insured for spray foam work in Palisades?
Yes. We carry full general liability and workers' compensation insurance. Before any work starts, ask us for proof of insurance so you can verify the coverage. That is the standard question, and we are ready for it.
When is the best time to do spray foam insulation in Palisades?
Spring and fall are ideal because the weather is mild and humidity is lower. Summer heat and occasional moisture from afternoon thunderstorms can complicate the cure, and winter wind and cold make it harder to maintain the right conditions. If you are facing a brutal winter or a scorching summer, call us anyway. We work year-round, and sometimes getting the insulation in before the season hits is worth the extra coordination. A winter cold snap or a summer cooling bill that is out of control is a good reason to schedule sooner rather than later.
Why choose us?

Trusted professionals since 2015

🏅

Insured contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Fully Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sat 7am-6pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Spray Foam Insulation Services in Amarillo

All your work handled by qualified professionals in Amarillo

Attic Spray Foam Insulation

Attic spray foam built for Amarillo's wind, heat, and blizzard swings

Included in your service

  • Attic floor and roof deck sealed against Panhandle wind
  • Closed cell foam sized for Amarillo's 4B dry climate swings
  • Old insulation cleared from brick ranch attics across Potter County
  • Air sealing to stop wind-driven dust in Randall County attics
Learn more→

Closed Cell Spray Foam Insulation

Closed cell spray foam rated for Amarillo's hail, wind, and hard freezes

Included in your service

  • Rigid closed cell foam resists hail and wind-driven moisture
  • Installed in rim joists and walls of Amarillo brick ranches
  • Sized per board foot for Panhandle metal shop buildings
  • Air barrier tested against Potter County's blowing wind
Learn more→

Open Cell Spray Foam Insulation

Open cell foam for quiet, well-sealed attics across Amarillo and Canyon

Included in your service

  • Expanding foam fills stud cavities in brick ranch walls
  • Cuts noise and drafts in windy Amarillo neighborhoods
  • Lightweight fill suited to older pier-and-beam Amarillo homes
  • Applied in attics and walls across Potter and Randall counties
Learn more→

Wall & Injection Foam Insulation

Wall injection foam for drafty brick ranch walls in Amarillo

Included in your service

  • Small holes drilled, foam injected into brick ranch walls
  • Stops wind-driven drafts common on Panhandle winter days
  • No drywall teardown needed on older Amarillo homes
  • Targets uninsulated cavities across Potter and Randall counties
Learn more→

Crawl Space Spray Foam Insulation

Crawl space foam to stop cold floors in Amarillo's pier-and-beam homes

Included in your service

  • Spray foam applied to crawl space walls and band joists
  • Blocks wind-driven drafts under older Amarillo pier-and-beam homes
  • Cuts cold floor complaints during Panhandle blizzard season
  • Serves crawl spaces across Potter and Randall counties
Learn more→

Rim Joist & Band Joist Spray Foam

Rim joist foam to stop blizzard drafts in Amarillo homes

Included in your service

  • Seals rim and band joists against Panhandle wind
  • Closes gaps common in slab-on-grade Amarillo homes
  • Stops cold air intrusion during blizzard season
  • Addresses a weak point in Potter and Randall county homes
Learn more→

Garage Spray Foam Insulation

Garage spray foam built for Amarillo's hot-to-cold swings

Included in your service

  • Seals garage walls against Panhandle wind and dust
  • Covers ceilings shared with living space in Amarillo homes
  • Handles temperature swings common in Panhandle garages
  • Fits attached garages in older Amarillo neighborhoods
Learn more→

Metal Building & Barndominium Spray Foam

Metal building foam for Panhandle farm shops and barndominiums

Included in your service

  • Sprayed on interior steel skin of Panhandle ag buildings
  • Cuts condensation common in metal shops near Amarillo
  • Handles hard hot-to-cold swings typical of Panhandle weather
  • Fits barndominiums and shops across Potter and Randall counties
Learn more→

Commercial & New Construction Spray Foam

Commercial and new construction foam for Amarillo and Canyon builds

Included in your service

  • Foam applied before drywall on new Canyon subdivisions
  • Coordinated with builders across Potter and Randall counties
  • Sized for commercial shells and Panhandle metal buildings
  • Free estimate for Amarillo and Canyon building projects
Learn more→

Insulation Removal

Insulation removal for worn-out Amarillo attics and walls

Included in your service

  • Clears flattened insulation from older Amarillo attics
  • Removes old fiberglass common in brick ranch walls
  • Preps attics for new foam before Panhandle winter
  • Serves homes across Potter and Randall counties
Learn more→

Insulation Replacement & Re-Insulation

Full re-insulation for Amarillo attics, walls, and crawl spaces

Included in your service

  • Removes old material before foam goes into Amarillo attics
  • Re-insulates walls in brick ranches across Potter County
  • Adds crawl space foam for older pier-and-beam homes
  • Sized for Amarillo's dry 4B climate and windy winters
Learn more→

Air Sealing

Air sealing to block Amarillo's wind-driven drafts and dust

Included in your service

  • Seals top plates and penetrations against Panhandle wind
  • Blower door tested for Amarillo's windy conditions
  • Cuts dust infiltration common in Panhandle blizzards
  • Lowers energy bills in brick ranches across Amarillo
Learn more→
Verified client reviews

39+ Verified Client Reviews in Amarillo

⭐⭐⭐⭐⭐ 4.9/5 · 39 verified Google reviews

Free Quote

Get Your Free Quote

Spray Foam Insulation in Amarillo · Response within 24h · No commitment · ☎ (806) 639-5022

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Fully Insured 📍 On-site visits included in Amarillo ✅ No hidden fees 🕐 Available Mon-Sat 7am-6pm